The natural gas of ignition controller refers to all natural gases in nature, including gases formed by various natural processes in the atmosphere, hydrosphere and lithosphere (including oil field gas, gas field gas, mud volcanic gas, coalbed gas and biogenic gas, etc.). The general definition of "natural gas" for a long time is a narrow definition from the perspective of energy, which refers to the mixture of hydrocarbon and non hydrocarbon gases naturally contained in the formation. In petroleum geology, it usually refers to oil field gas and gas field gas. It is mainly composed of hydrocarbons and contains non hydrocarbon gases. Natural gas belongs to non renewable energy. Methane is widely distributed in nature. Methane is the simplest organic matter and the main component of natural gas, biogas and pit gas, commonly known as gas. It is also the hydrocarbon with the lowest carbon content (the largest hydrogen content) and the main component of natural gas, biogas, oilfield gas and coal mine pit gas. Therefore, methane is one of the components of natural gas and belongs to non renewable energy.

天然氣燒嘴是現在社會和工業使用比較多的，天然氣燒嘴是比較科學環保的，在這里虎博小編和您講講天然氣燒嘴性能優點表現。

Natural gas burners are widely used in society and industry. Natural gas burners are more scientific and environmental friendly. Here, Hubo Xiaobian will tell you about the performance advantages of natural gas burners.

天然氣燒嘴節能優勢：天然氣加熱爐頂的短小煙囪很容易制成熱交換器，將燃燒所需要的助燃風進行預熱，做成蓄熱式燃燒系統，從而提高熱效率。

Energy saving advantages of natural gas burner: the short chimney on the top of natural gas heating furnace can easily be made into a heat exchanger to preheat the combustion supporting air required for combustion and make it into a regenerative combustion system, so as to improve the thermal efficiency.

天然氣燒嘴的特點：

Characteristics of natural gas burner:

對于中小型鍛造加熱爐，天然氣燃燒機一般裝在頂部。對于中大型加熱爐，燒嘴裝在兩側。為了使爐膛溫度均勻，應選用高速燒嘴。鍛造加熱所用的燒嘴一般不采用全自動機電一體化燒嘴，而采用自動分體式燒嘴，這樣有利于得到高速火焰，也便于靈活的工藝控制。

For small and medium-sized forging heating furnaces, the natural gas burner is generally installed on the top. For medium and large heating furnaces, burners are installed on both sides. In order to make the furnace temperature uniform, high-speed burner should be selected. Generally, the burner used for forging heating does not adopt full-automatic electromechanical integration burner, but adopts automatic split burner, which is conducive to high-speed flame and flexible process control.

天然氣燒嘴

Natural gas burner

天然氣燒嘴是工業爐用油嘴或煤氣燒嘴將油或煤氣當作燃料來燃燒所使用部件的總稱，是燃燒爐的核心部件。所以對燃氣燒嘴的要求較高：

Natural gas burner is the general name of the components used by industrial furnace oil nozzle or gas burner to burn oil or gas as fuel. It is the core component of combustion furnace. Therefore, the requirements for gas burner are high:

1）燃氣燒嘴燃燒效率高，在空氣系數較低的情況下，達到完全燃燒。

1) The gas burner has high combustion efficiency and achieves complete combustion under the condition of low air coefficient.

2）燃氣燒嘴燃燒穩定，可適應較大的負荷變化，調節比率大，燃燒溫度能滿足工藝要求。

2) The gas burner has stable combustion, can adapt to large load changes, large regulation ratio, and the combustion temperature can meet the process requirements.

3）燃氣燒嘴火焰性能好，具有較高的速度和較大的剛性，輻射能力強。

3) The gas burner has good flame performance, high speed, high rigidity and strong radiation ability.

4）燃氣燒嘴有較高的熱回收能力，表現在可使用預熱空氣或預熱煤氣的能力，以降低能耗。

4) The gas burner has high heat recovery capacity, which is reflected in the ability to use preheated air or preheated gas to reduce energy consumption.

5）燃氣燒嘴符合安全與環保規定，如噪聲小、有害氣體少、煙塵少等。

5) The gas burner complies with the safety and environmental protection regulations, such as low noise, less harmful gas, less smoke and dust, etc.

6）燃氣燒嘴結構簡單、操作容易、維修方便、使用壽命長。天然氣燒嘴是現在社會和工業使用比較多的，天然氣燒嘴是比較科學環保的

6) The gas burner has the advantages of simple structure, easy operation, convenient maintenance, low price and long service life. Natural gas burners are widely used in society and industry. Natural gas burners are more scientific and environmental friendly